The data set under this DOI contains the raw and processed data from the tenth deployment of the LOCO2 mooring (LOCO2_10) in the central Irminger Sea

===============================================
MOORING DEPLOYMENT INFORMATION
===============================================

Location: 59 degrees 12.32 minutes North, 39 degrees 30.47 minutes West.
Deployment: 2 August 2012 by RV Pelagia (cruisenumber 64PE358).
Recovery:  26 July 2014 by RV Knorr (cruisenumber KN_221_2).

mooring_diagram_LOCO2_10.pdf details which instrument was located where in the mooring.
Note that the depths indicated in the diagram are the design depths based on the expected bottom depth.
Final depths may deviate from the design depths, refer to instrument pressure for accurate depths.

Comments: 
- The deep ADCP stopped recording early. The pressure sensor of this instrument was broken, a pressure record has been recontructed based on pressure of the other instruments during this deployment and behavior of the mooring (blow down) during previous deployments.
- The MMP profiler was unable to record full profiles for a large part of the record. Possibly due to a broken spring that thus no longer fixed the driving wheel to the cable.


===============================================
RAW DATA
===============================================
_raw files are the data as downloaded from the instrument. No processing has been applied.

Accoustic Doppled Current Profilers (ADCPs) 
-----------------------------------------------
- LOCO2_10_ADCP_3550_125m_raw.000
- LOCO2_10_ADCP_2445m_raw.000

SBE37/Microcats 
-----------------------------------------------
- LOCO2_10_MCTD_4354_154m_raw.cnv (.cnv time in julian days)
- LOCO2_10_MCTD_4354_154m_raw.asc (.asc time as string: dd mmm yyyy, hh:mm:ss)
- LOCO2_10_MCTD_2656_3003m_raw.cnv
- LOCO2_10_MCTD_2656_3003m_raw.asc

McLane Moored Profiler (MMP) 
-----------------------------------------------
LOCO2_10_MMP_1200901_150-2400m_raw.zip


===============================================
PROCESSED DATA
===============================================

Accoustic Doppled Current Profilers (ADCPs) 
-----------------------------------------------
ADCP data is corrected for magnetic declination at the location and time of deployment.
The applied declination correction is saved in variable adcp.sensor.magvar.
- LOCO2_10_ADCP_3550_125m_final.mat
- LOCO2_10_ADCP_2445m_final.mat

SBE37/Microcat
-----------------------------------------------
Data are despiked, salinity and potential temperature and density (rel. to surface) are derived. 
- LOCO2_10_MCTD_4354_154m_final.mat
- LOCO2_10_MCTD_2656_3003m_final.mat

McLane Moored Profiler (MMP) 
-----------------------------------------------
MMP CTD data in _final.zip are despiked, salinity and potential temperature and density (rel. to surface) are derived and data is converted into 1 dbar bin averaged profiles.
In _ctd_corrected_final additional quality control steps have been applied. Calibration to shipboard CTD before/after deployment (if available) and bad data has been replaced by NaNs.
- LOCO2_10_MMP_1200901_150-2400m_final.zip
- LOCO2_10_MMP_1200901_150-2400m_ctd_corrected_final.zip